Changelog
HD Legacy Pumper

Version 2022.09.26 Early Access

Open Legacy Pumper Manual

Version 2022.09.26

  • Pump HUD Update
  • New Features
  • - added Modular HUD Pump Tab for Legacy Pumper (requires Modular HUD v2022.09.26)
  • Documentation
  • - added information about Pump Info Center Warning Messages
  • - added information about Gear Shifter only working while Engine is running
  • Bugfixes
  • - INC/DEC/TGL buttons for Bumper Line, Rear No.1 and Rear No.2 Pro-Valve sometimes give odd adjustments
  • - Pump Limit boost from incoming pressurized hose lines was no longer applied
  • - unable to close compartment roll-up after manually deleting deployed Junction Box
  • - various issues with Cable Reel and Junction Box when using 'Restock All' feature
  • - fails to delete deployed Junction Box
  • - fails to clear locked Parking Brake
  • - fails to hide deployed part of cable
  • - Pump Safety Shutdown caused by Crosslays fails to deflate Crosslay hose in tray
  • - Pump Info Center Warnings for Low Fuel, Low Foam and Low Water no longer show up
  • - fixed being able to switch Gears with Page Up and Page Down while Engine is not running
  • - fixed full script reset fails to clear pump panel sit target
  • - fixed Deckgun Control Input while automatic deploy or stow is in process leads to odd results
  • - fixed Pump Panel access check for removing connected hose lines no longer works
  • - fixed change in Hose Line flow limit fails to update Master Discharge and Pro-Valve GPM readouts
  • example for a flow limit change: opening the valve on a connected Gated Wye

Version 2022.08.01

  • Foam & Drafting Update
  • New Features
  • - added new Drafting Rules (Details available here)
  • - added Pull-To-Prime lever
  • - added Foam Refill Panel functionality (Details available here)
  • - added Water & Foam Fill Tower
  • - added adjustable foam injection rate
  • - added handout for new Foam Jugs in driver side rear compartment
  • - added handout for Foam Refill Hose in driver side front compartment
  • - added new Script-API command 'GET STATUS'
  • - added more labels to the pump for Intakes and Discharges
  • - added 'Water Only' label for Supply No.1
  • Changes
  • - changed transmission to automatically shift to Neutral when engine is turned off
  • - changed Deckgun GPM Display to show in red when Deckgun is stowed
  • - changed 'Pump PTO' to 'Pump Power Shift'
  • - changed accelerator to no longer be active while Pump Power Shift is set to Pump
  • - improved existing Script API commands for 'SET POS / ROT'
  • - rewrote Pump Script in preparation for HUD Support (next update)
  • - rewrote and reorganized several Scripts for future Modify Support (after Early Access)
  • Documentation
  • - fixed 2000 GPM pump option is not mentioned in manual
  • - fixed Marker Light direct interaction not mentioned in manual
  • - fixed Generator PTO is not explained in manual
  • Bugfixes
  • - fixed incorrect screw head texture on Pump Draft Panel
  • - fixed Engine Fan switch does not consume electricity
  • - fixed Foam Master Panel displays fail to illuminate
  • - fixed Direct Interaction for High Beams no longer works
  • - fixed turning pumper off while generator is full engaged only clears GEN PTO switch but no GEN ON switch
  • - fixed changing foam tank size refills it instead of keeping same fill percentage as prior to change
  • - fixed battery fails to charge via shoreline when switching off battery master switch
  • - fixed A/C Condenser fails to consume electricity
  • - fixed 'Restock All' option fails to restore Ladder Boot
  • - fixed Direct Interaction for Beacons, Marker Lights, Headlight and Turn Signal works for none crew avatars

Version 2022.02.09

  • Hydrant CE Compatibility Update
  • - updated Hydrant Bag model and texture to latest version
  • - updated Hydrant Wrench to new version from Hydrant CE
  • - added compatibility for Hose Line Drop Feature
  • - fixed 'Bad Road Fix' fails to apply if vehicle is stuck

Version 2021.08.08

  • Emergency Light Custom Color Update
  • - added ‘Custom’ to Traffic Director and Rear Beacon menus
  • - added ‘Color Mode’ to EM Lights Menu to change individual Flashers, Lightbar Modules and Rotoray
  • – fixed clicking on Front Bumper Flasher for direct interaction fails to check if avatar is sitting in vehicle
  • – fixed EM Lights Menu info text says ‘Select sound to change’
  • – fixed Decal Mode and then standing up force opens door and can not be closed
  • – fixed Penguin Hardcase rezzes white copies when taken
  • – fixed Penguin Hardcase color change applies to Hydrant Bag strap instead
  • – changed wording of pump error ‘Out of water!’ warning to ‘Insufficient water supply!’

Version 2021.06.15

  • On-Board Generator Update
  • - added Work Lights to available equipment
  • - added Junction Box to available equipment
  • - added on-board generator functionality
  • - added new Interaction menus via Gear HUD and Select HUD, more info here
  • - added shelf with cardboard boxes to hand out spare batteries
  • - fixed hosebed flap raised while scripts are reset gives unexpected results
  • - fixed Pump PTO Switch instructions list 'shift to D' instead of 4th gear while in NextGen Transmission mode

Version 2021.03.22

  • Survey Update
  • - added 'Survey' to Main Menu, more info here
  • - renamed 'Customize' to 'Sync HUD'
  • - moved 'Sync HUD', 'Decal Mode' and 'EM Lights' to separate 'Customize' Menu
  • - fixed Q-Siren Control Labels fail to illuminate when Panel Lights are turned on
  • - fixed missing Direct Interaction when clicking on Marker Lights for Cab, Box and rear Bumper
  • - fixed missing Direct Interaction when clicking on Box Flashers
  • - fixed missing Direct Interaction when clicking on Brake Lights
  • - fixed missing Direct Interaction when clicking on Beacons
  • - fixed Legacy Pumper drives very slowly when releasing Parking Brake while applying Service Brakes
  • - fixed Modular HUD Lights tab Wig-Wag and Rotoray are reversed on sync (requires Modular HUD Update)

Version 2021.02.24

  • Early Access Modular HUD & Foam Update
  • Thank you to everyone who has submitted bug reports and has volunteered to help test the beta versions.
  • Bugfixes
  • - fixed clicking on deployed Crosslay fails to remove hose connection
  • - fixed clicking on deployed Crosslay No.2 can get Pumper stuck
  • - fixed clicking on deployed Crosslay No.2 stores Crosslay No.1 instead
  • - fixed cab GEN PTO switch fails to check for running engine
  • - fixed script reset fails to restore rear Beacon color
  • - fixed Customize HUD setting for Fire Extinguisher medium shine applies high shine instead
  • - fixed broken transmission when switching between Automatic and NextGen mode
  • - fixed backup camera missing local chat info when activated
  • - fixed Deckgun Valve Panel sometimes fails to update GPM readout
  • - fixed Cabinet Ajar warning is inconsistent when Roll Ups are openend
  • - fixed Direct Interaction features are not limited to Driver and Officer
  • - fixed Restock All fails to restock cab mounted handheld lights
  • - fixed hose connection to Gated Wye fails to update water pressure
  • - fixed unable to remove hose connections originally deployed by other avatars
  • Changes
  • - changed Pump Panel gauge lights and panel lights to interlock with Pump PTO switch
  • - changed default driving camera position to a higher angle
  • Modular HUD Support
  • - added Modular HUD support for Driver
  • - added new design for Modular HUD (exclusive to Legacy Pumper)
  • - added ability to resize Modular HUD
  • - added ability to show/hide individual control elements
  • - added ability to save/load Modular HUD settings
  • Preliminary Foam System
  • - added functionality for Foam System panel with fixed 3% injection rate
  • - added Foam Injection for: Crosslay No.1 & No.2, Bumper Line, Rear No.1 & No.2, Attack No.1 & No.2
  • - added optional Foam Injection for Master Stream (Deckgun)
  • - added Foam Refill compatibility with Fire System Foam Cabinet and NextGen Foam Unit

Version 2020.11.05

  • Early Access Bugfix Update
  • Thank you to everyone who has submitted bug reports.
  • fixed connected hose lines do not apply Legacy Pumper Access Setting for Crew
  • fixed Sound Menu options High/Low, Priority and Powercall reset to the wrong sound for Default
  • fixed Sound Menu is missing “Man. Siren” option
  • fixed Sound Menu custom airhorn fails to stop sound on button depress
  • fixed Sound Menu 'Q-Siren' button should be changed to 'Auto-Siren'
  • fixed Sound Menu custom backup sound gets replaced with NULL KEY
  • fixed Sound Menu Q-Siren, Airhorn and Backup sound are applied to wrong target
  • fixed roll ups on right side are switched up
  • fixed Traffic Director reverts to orange color when activated
  • fixed Traffic Director color on controller box does not change
  • fixed Crosslays when set to Combination, will pull as Smoothbore if pump back-panel option has been changed
  • fixed Texture bug when grabbing the binding agent (requires Gear HUD update)
  • fixed Pumper runs without any batteries after they are swapped several times
  • fixed hidden front bumper supply line becomes visible after lowering the raised cab
  • fixed emergency light direct interaction via Rotoray still works if Rotoray is hidden
  • fixed typo on Cab Lift Instructions, should be Ensure instead of Insure
  • fixed Cab Lift Instructions to better match Cab Lifting Procedure and Switch Labels
  • fixed foam tank size on the pump specification plaque shows as 30 but is actually 60 when Pumper is first rezzed
  • fixed gear 1 and gear 2 override are reversed
  • fixed Options menu should not show active ScriptAPI channel to non-owner
  • fixed missing Restock SCBA in menu
  • fixed turn radius setting fails to update in menu info when changed
  • fixed brake strength fails to update in menu info when changed
  • fixed manually raising Deckgun does not trigger do not move warning
  • fixed Restock All does not make wheel chocks visible again
  • fixed wheel chocks don’t become visible on script reset
  • fixed should not allow refueling with ignition turned on
  • fixed should cancel refueling if ignition is turned on
  • fixed rear license plate illumination stays on when power is cut
  • fixed auto-stow of Deckgun fails to properly update Do-Not-Move warning
  • fixed odometer menu option does not update mileage correctly
  • fixed miles on odometer are rounded incorrectly
  • fixed report odometer and actual odometer do not match
  • fixed Front Bumper Trashline hands out incorrect nozzle type if unit number is hidden
  • fixed Q-Siren and Auto-Siren do not consume power
  • fixed pump discharge valve controllers have incorrect minimum GPM flow
  • fixed unable to start engine with empty fuel tank and fuel system turned off
  • fixed turning off fuel system does not clear Out-Of-Fuel warning
  • fixed leaving overlay input blank does not clear license plate overlay, applies default texture instead
  • fixed delivery box is missing shadow texture for the flag
  • fixed unable to skip cab texture when applying custom paintjob textures via Customize HUD Misc tab
  • fixed confusing Customize HUD menu text when applying custom textures
  • fixed releasing the parking brake immediately after starting causes the parking brake light to stay on
  • fixed hiding the front intake with a hose connected leaves the cap visible
  • fixed disabling bumper chevron option applies incorrect color
  • fixed q-siren and auto-siren switches are reversed
  • fixed wheels spin after you stop until you release the brake

Version 2020.09.30

  • Early Access Release
  • Thank you to all HD Legacy Testers who helped to make this project possible.