Manual
HD Tanker 1
Version 2022.10.07
Open Tanker 1 Changelog
INDEX:
0) Welcome
Thank you for purchasing Tanker 1 from HD Emergency.
If you are experiencing any problems with your product, please be sure that you have read this manual in its entirety and you fully understand its contents.
If at any point this manual does not help you please join the HD Emergency Equipment and supplies group and ask your question within the group chat.
Alternatively you can also join the HD Discord Server and ask your question in the #helpdesk channel.
We hope you enjoy your product from HD Emergency! Thank you for the support!
If you are experiencing any problems with your product, please be sure that you have read this manual in its entirety and you fully understand its contents.
If at any point this manual does not help you please join the HD Emergency Equipment and supplies group and ask your question within the group chat.
Alternatively you can also join the HD Discord Server and ask your question in the #helpdesk channel.
We hope you enjoy your product from HD Emergency! Thank you for the support!
1) Specifications
General
- Full Mesh Build- Seats Two Avatars (driver + officer in cab)
- Working Headlights, Taillights, Turn Signals and Hazard Lights
- Parking Brake to switch Physics on or off
- Opening Cab Doors and Compartments
- Compatible with the NTBI Global Fuel System
50.0 Gallon Diesel Fuel Tank
Maximum 85.0 miles to a tank
1.70 Miles Per Gallon
- Compatible with the HD Exhaust Removal SystemMaximum 85.0 miles to a tank
1.70 Miles Per Gallon
- Compatible with the HD Electric Charging System
Elliptical Water Tank
- 2500 gallons capacity- manual operated rear dump
- electric operated side dump with in-cab, HUD and rear controls
- side mounted 4000 gallons foldable drop tank
- 2000 GPM gravity based water dump
Pump System
- Compatible with the HD Fire System 2- 2500 Gallon Water tank
- Two 5.0" Intakes
- One 5.0" Discharge
- Two 2.5" Intakes
- One 2.5" Discharges
- Two 2.5" Crosslays
- Two 2.5" Tank Intakes
- 1000 GPM Pump Limit
Emergency Lights System
- HD Classic Lightbar- Rear Mounted Beacons
- Front Mounted Rotoray
- 2 Wig-Wag Front Strobes
- 3 LEDs each side
- 2 LEDs on rear
- Traffic Director Lightbar
- fully customizable with RGB input option
Sound Setup
- working mechanical wave siren- airhorn and electrical horn
- primary, secondary and manual siren
- with option for custom Sound UUIDs
Equipment
- Large and Small Diameter Supply Line- Attack Line with Combi and Smoothbore Nozzles
- Suction Hose Segments and Draft Float
- One Fire Extinguishers
- Six Spare SCBA Bottles
- Medical Jump Bag
- Caution Tape and Duct Tape
- Firefighter Hand Tools
- Handheld Light
- Binding Agent
- Wheel Chocks
- Drop Tank
- Tool Box
- Two Foam Jugs
Customization
- Twelve Stock Paintjobs- Twelve Chevron Patterns
- Full Paintjob Templates
- Two Decal Texture Spots
- Eight Front Bumper patterns
- Truck Number 1 to 9999
- Side Mirror Chevrons
- Wheel Cap Color
- Tank Color and Shine
- License Plates
- Support for HD ThemeBox3
2) Main Menu
2.1 Kick
This button allows you to eject a passenger out of the vehicle.
2.2 Manual
This button will give you a link to the online Manual, which you are reading right now.
2.3 Report
This will send a text report to your local chat in regards to the vehicle's status.
The report shows you who last drove the vehicle and the time at which they sat down.
It also shows the same information for the last person to operate the pump panel.
It will also display the vehicle's fuel status and total driven miles.
The report shows you who last drove the vehicle and the time at which they sat down.
It also shows the same information for the last person to operate the pump panel.
It will also display the vehicle's fuel status and total driven miles.
2.4 Restock
This will restock all equipment in the compartments of the truck in case any of it was lost.
In order to restock any used SCBA bottles you need to use the 'RestockSCBA' button in the main menu.
The button is only visible if any of the SCBA bottles are missing.
Restocking SCBA bottles requires a nearby SCBA Station.
In order to restock any used SCBA bottles you need to use the 'RestockSCBA' button in the main menu.
The button is only visible if any of the SCBA bottles are missing.
Restocking SCBA bottles requires a nearby SCBA Station.
2.5 Kill Fires
This button will allow you to kill any and all fires within the same region of the apparatus.
This is extremely useful when a situation gets out of hand.
2.6 Modular HUD
This vehicle is compatible with the HD Modular HUD, which is distributed by a centralized server within Second Life.
To receive a copy of the latest version simply select 'Modular HUD' in the main menu of your vehicle.
The Modular HUD allows you to control all of the functions of your vehicle.
It will display different buttons and controls based on which spot you are sitting on.
An automatic sync to your vehicle is performed when attaching the HUD or sitting down.
To receive a copy of the latest version simply select 'Modular HUD' in the main menu of your vehicle.
The Modular HUD allows you to control all of the functions of your vehicle.
It will display different buttons and controls based on which spot you are sitting on.
An automatic sync to your vehicle is performed when attaching the HUD or sitting down.
2.7 Gear HUD
This vehicle is compatible with the HD Gear HUD, which is distributed by a centralized server within Second Life.
To get a copy of the latest version simply select 'Gear HUD' in the main menu of your vehicle.
The Gear HUD handles most of the equipment on the HD Fire Trucks.
You will not be able to use the compatible equipment without having the Gear HUD attached.
For more information on the features of the Gear HUD please consult the HD Fire System 2 Manual.
To get a copy of the latest version simply select 'Gear HUD' in the main menu of your vehicle.
The Gear HUD handles most of the equipment on the HD Fire Trucks.
You will not be able to use the compatible equipment without having the Gear HUD attached.
For more information on the features of the Gear HUD please consult the HD Fire System 2 Manual.
3) Owner Only
3.1 Customize
The customize menu allows you to change various settings for the appearance of your truck.
Depending on the selection you can either select a stock option or apply your own custom textures or colors.
For further information about Custom Textures and Decals please check the respective manual section.
Depending on the selection you can either select a stock option or apply your own custom textures or colors.
For further information about Custom Textures and Decals please check the respective manual section.
3.2 Access
This menu allows you to change the vehicle's permissions on who can operate it.
There are two levels of access: Crew and Passenger.
Crew includes the Driver and Pump Operator.
Passenger only allows to sit in any of the passenger seats or stand on the tailboard.
You may set each to Owner, Group or Everyone.
Group includes all members of the group that the truck is set to.
To further restrict the access the truck supports the use of a With the whitelist you can add specific people to the Crew role.
There are two levels of access: Crew and Passenger.
Crew includes the Driver and Pump Operator.
Passenger only allows to sit in any of the passenger seats or stand on the tailboard.
You may set each to Owner, Group or Everyone.
Group includes all members of the group that the truck is set to.
To further restrict the access the truck supports the use of a With the whitelist you can add specific people to the Crew role.
3.3 Options
This menu allows you to change the vehicle's miscellaneous settings such as:
- Toggling Fuel System On/Off
- Renaming the vehicle
- Changing the Anti-Roll-Over (ARO) System Settings
- Installing Custom Sound UUIDs
- Adjusting Turn Radius Setting
- Adjusting Brake Strength Setting
- Activating the Pump Panel Help Mode
- Removing all HD Fires within the Region
- Setting a website URL for the Clipboard in the cab
- Setting up the Script API
- Toggling Fuel System On/Off
- Renaming the vehicle
- Changing the Anti-Roll-Over (ARO) System Settings
- Installing Custom Sound UUIDs
- Adjusting Turn Radius Setting
- Adjusting Brake Strength Setting
- Activating the Pump Panel Help Mode
- Removing all HD Fires within the Region
- Setting a website URL for the Clipboard in the cab
- Setting up the Script API
4) Tanker Operation
The HD Tanker 1 has a 2500 gallon elliptical water tank and two dump chutes.
It also comes with a side mounted 4000 gallon portable drop tank.
You can click on the large lever on the side of it to open or close the dump valve.
There are three sets of controls for it:
- on the rear of the truck
- inside of the cab on the center console
- on the HD ModularHUD while seated as the driver
The chute can be extended / retracted and the dump valve can be triggered.
In order to place the drop tank:
- close all passenger side compartment doors
- click on holder to lower it
- once lowered click on folded drop tank
- the drop tank will rez in ghost mode in front of your avatar and will follow your movements
- move your avatar until the drop tank is in the right position, then click on it
- the drop tank will be placed on the ground
In order to pick up the drop tank:
- click the drop tank and hold down the mouse button until the menu opens
- select 'Pick Up' in the menu, the drop tank will enter ghost mode again
- make sure that the drop tank holder on Tanker 1 is lowered
- move your avatar to line up the center of the drop tank next to the lowered holder
- hover text will indicate when it is in the correct position
- click on the drop tank to load it back into its holder
Connecting a hose to the drop tank:
You can connect both Suction Hoses and Small Supply Lines to the drop tank.
A suction hose will automatically use a low lever strainer to draft water from the drop tank.
A supply line will utilize a special holder in order to attach to the frame of the drop tank.
Once attached you can use the supply line to fill the drop tank with water.
Drop Tank Access Settings:
The drop tank will use the active access setting of the GearHUD.
Once placed you can click on the drop tank and hold down the mouse button to open the menu.
In the menu you can select 'Access' to adjust the access settings.
You need to manually open the roof hatch of the water tank in order to refill it.
It also comes with a side mounted 4000 gallon portable drop tank.
Rear Dump Chute
The read dump chute is operated manually. You can click on the chute itself to extend and retract it.You can click on the large lever on the side of it to open or close the dump valve.
Side Dump Chute
The side dump chute is operated electronically.There are three sets of controls for it:
- on the rear of the truck
- inside of the cab on the center console
- on the HD ModularHUD while seated as the driver
The chute can be extended / retracted and the dump valve can be triggered.
Portable Drop Tank
The passenger-side mounted holder carries a 4000 gallon foldable drop tank.In order to place the drop tank:
- close all passenger side compartment doors
- click on holder to lower it
- once lowered click on folded drop tank
- the drop tank will rez in ghost mode in front of your avatar and will follow your movements
- move your avatar until the drop tank is in the right position, then click on it
- the drop tank will be placed on the ground
In order to pick up the drop tank:
- click the drop tank and hold down the mouse button until the menu opens
- select 'Pick Up' in the menu, the drop tank will enter ghost mode again
- make sure that the drop tank holder on Tanker 1 is lowered
- move your avatar to line up the center of the drop tank next to the lowered holder
- hover text will indicate when it is in the correct position
- click on the drop tank to load it back into its holder
Connecting a hose to the drop tank:
You can connect both Suction Hoses and Small Supply Lines to the drop tank.
A suction hose will automatically use a low lever strainer to draft water from the drop tank.
A supply line will utilize a special holder in order to attach to the frame of the drop tank.
Once attached you can use the supply line to fill the drop tank with water.
Drop Tank Access Settings:
The drop tank will use the active access setting of the GearHUD.
Once placed you can click on the drop tank and hold down the mouse button to open the menu.
In the menu you can select 'Access' to adjust the access settings.
Refill Pipes
The HD Tanker 1 is fully compatible with the HD Refill Pipes.You need to manually open the roof hatch of the water tank in order to refill it.
5) Equipment
You need to wear the HD Gear HUD in order to use any of the equipment.
You can click on most of the items in the compartments to grab a copy.
The equipment will temp-attach directly to your avatar.
Some of the equipment can only be taken once and will restore to the truck when detached while in the same region.
If any of the equipment goes missing then you can select 'Options' > 'Restock' in the truck menu to restore it.
Available Equipment:
You can click on most of the items in the compartments to grab a copy.
The equipment will temp-attach directly to your avatar.
Some of the equipment can only be taken once and will restore to the truck when detached while in the same region.
If any of the equipment goes missing then you can select 'Options' > 'Restock' in the truck menu to restore it.
Available Equipment:
- Large and Small Diameter Supply Line
- Attack Line with Combi and Smoothbore Nozzles
- Suction Hose Segments and Draft Float
- One Fire Extinguishers
- Six Spare SCBA Bottles
- Medical Jump Bag
- Caution Tape and Duct Tape
- Firefighter Hand Tools
- Handheld Light
- Binding Agent
- Wheel Chocks
- Drop Tank
- Tool Box
- Two Foam Jugs
- Attack Line with Combi and Smoothbore Nozzles
- Suction Hose Segments and Draft Float
- One Fire Extinguishers
- Six Spare SCBA Bottles
- Medical Jump Bag
- Caution Tape and Duct Tape
- Firefighter Hand Tools
- Handheld Light
- Binding Agent
- Wheel Chocks
- Drop Tank
- Tool Box
- Two Foam Jugs
6) Chat Commands / Gestures
The truck listens on channel 2569 to the active driver and officer.
A pack of compatible gestures is available from the Manual HUD
The following commands are supported:
A pack of compatible gestures is available from the Manual HUD
The following commands are supported:
Signal Left [Ctrl+Left] = sigL
Signal Right [Ctrl+Right] = sigR
Hazard Lights [Ctrl+Up] = sigH
Camera [1-9] = cam1 - cam9
Next Camera [0] = cam0
Code 2 (lights) [F2] = code2
Code 3 (lights & siren) [F3] = code3
Code 4 (off) [F4] = code4
Park Brake [Space] = hb
Headlight [L] = headlight
Horn [H] = horntap
EM Master Switch [B] = light
Siren Primary [T] = siren1
Siren Secondary [G] = siren2
Siren Manual [Y] = sirentap
Lightbar [Shift+1] = lightbar
Strobes All [Shift+2] = strobe
Strobes Front [Shift+3] = strobeF
Strobes Side [Shift+4] = strobeS
Strobes Rear [Shift+5] = strobeR
Scenelight [Shift+6] = scene
Beacons [Shift+7] = beacon
Traffic Director [Shift+8] = director
Exit Vehicle [-] = exit
Signal Right [Ctrl+Right] = sigR
Hazard Lights [Ctrl+Up] = sigH
Camera [1-9] = cam1 - cam9
Next Camera [0] = cam0
Code 2 (lights) [F2] = code2
Code 3 (lights & siren) [F3] = code3
Code 4 (off) [F4] = code4
Park Brake [Space] = hb
Headlight [L] = headlight
Horn [H] = horntap
EM Master Switch [B] = light
Siren Primary [T] = siren1
Siren Secondary [G] = siren2
Siren Manual [Y] = sirentap
Lightbar [Shift+1] = lightbar
Strobes All [Shift+2] = strobe
Strobes Front [Shift+3] = strobeF
Strobes Side [Shift+4] = strobeS
Strobes Rear [Shift+5] = strobeR
Scenelight [Shift+6] = scene
Beacons [Shift+7] = beacon
Traffic Director [Shift+8] = director
Exit Vehicle [-] = exit
7) Textures
This truck comes with full templates for the body.
You can find them online: HD Templates
The body textures have to be saved as JPG in order to display properly.
To apply your custom paintjob textures:
All decal textures have to be saved as PNG with a full transparent background.
For the decals you can use the UUID 8dcd4a48-2d37-4909-9f78-f7a9eb4ef903 for a fully transparent texture.
Decal Areas:
Texture Helper:
You can find them online: HD Templates
The body textures have to be saved as JPG in order to display properly.
To apply your custom paintjob textures:
1) Click on the roof of the cab to bring up the main menu
2) Select 'Customize' and then 'Paintjob'
3) Select either 'Custom Cab' or 'Custom Box' and enter the UUID
2) Select 'Customize' and then 'Paintjob'
3) Select either 'Custom Cab' or 'Custom Box' and enter the UUID
All decal textures have to be saved as PNG with a full transparent background.
For the decals you can use the UUID 8dcd4a48-2d37-4909-9f78-f7a9eb4ef903 for a fully transparent texture.
Decal Areas:
Cab Door: applied to the doors of the cab, aspect ratio is 1:1.
Sign: applied to the side hose bed, aspect ratio is 8:1 (visible area is 6:1).
Sign: applied to the side hose bed, aspect ratio is 8:1 (visible area is 6:1).
Texture Helper:
The texture helper can be used to apply local textures for your paintjob.
Rez the texture helper next to your truck and make sure that the backside is aimed towards your truck.
The owner of the helper and the owner of the truck have to match.
There are 3 faces on the front. The left is for the Cab, the center for the Body texture and the right is for the Tank texture.
Use the Second Life build tools floater to select your texture from your inventory or your hard drive.
You can click the texture helper to force an update onto the truck it is aimed at.
Every time the local texture on your hard drive changes it will automatically be applied to the truck.
Rez the texture helper next to your truck and make sure that the backside is aimed towards your truck.
The owner of the helper and the owner of the truck have to match.
There are 3 faces on the front. The left is for the Cab, the center for the Body texture and the right is for the Tank texture.
Use the Second Life build tools floater to select your texture from your inventory or your hard drive.
You can click the texture helper to force an update onto the truck it is aimed at.
Every time the local texture on your hard drive changes it will automatically be applied to the truck.
8) HD Theme Box 3
This truck is fully compatible with the HD ThemeBox3.
You can edit the basic HD ThemeBox3 that came packaged with this truck.
The Vehicle Parameter has to be set to the following: HD Aerial 1
The following Parameters are supported by this vehicle:
All of those parameters are optional, you can leave any of them if you do not want to overwrite that particular setting.
The HD Texture Templates are available online: HD Templates
You can edit the basic HD ThemeBox3 that came packaged with this truck.
The Vehicle Parameter has to be set to the following: HD Aerial 1
The following Parameters are supported by this vehicle:
ThemeBox = UUID of texture that should appear on side of the HD ThemeBox
Texture Cab Top = UUID of cab top half texture
Texture Cab Bottom = UUID of cab lower half texture
Texture Body = UUID of body texture sides and front
Texture Rear = UUID of body texture on back side
Texture Tank = UUID of elliptical tank texture
Decal Door = UUID of decal on cab doors (1:1 ratio)
Decal Sign = UUID of hose bed sign texture (8:1 ratio)
Color Ladder = RGB-Color-Vector of ladder that is mounted on elliptical water tank
Color Wheels = RGB-Color-Vector of the wheel caps
Color Tank = RGB-Color-Vector of the elliptical water tank
Freebie = TRUE or FALSE. If set to TRUE then no next owner permission warnings are given.
Texture Cab Top = UUID of cab top half texture
Texture Cab Bottom = UUID of cab lower half texture
Texture Body = UUID of body texture sides and front
Texture Rear = UUID of body texture on back side
Texture Tank = UUID of elliptical tank texture
Decal Door = UUID of decal on cab doors (1:1 ratio)
Decal Sign = UUID of hose bed sign texture (8:1 ratio)
Color Ladder = RGB-Color-Vector of ladder that is mounted on elliptical water tank
Color Wheels = RGB-Color-Vector of the wheel caps
Color Tank = RGB-Color-Vector of the elliptical water tank
Freebie = TRUE or FALSE. If set to TRUE then no next owner permission warnings are given.
All of those parameters are optional, you can leave any of them if you do not want to overwrite that particular setting.
The HD Texture Templates are available online: HD Templates
9) Script API
This truck comes with a simple Script API.
To activate it click on the center of the truck and select 'Options' > 'Script API'
Now enter the channel you want to use to send the commands.
Leave it blank to deactivate the Script API.
The owner of the sending object has to match the owner of the truck.
The following commands are supported:
The truck will reply to each command by repeating it plus an integer for the execution status.
Possible reasons for movement not being successful:
Example:
To activate it click on the center of the truck and select 'Options' > 'Script API'
Now enter the channel you want to use to send the commands.
Leave it blank to deactivate the Script API.
The owner of the sending object has to match the owner of the truck.
The following commands are supported:
DEREZ
the truck will derez
SET POS;(vector)
the truck will move to the given region position
SET ROT;(rotation)
the truck will change to the given global rotation
SET POS ROT;(vector);(rotation)
the truck will move to the given region position and global rotation
GET STATUS
the truck will derez
SET POS;(vector)
the truck will move to the given region position
SET ROT;(rotation)
the truck will change to the given global rotation
SET POS ROT;(vector);(rotation)
the truck will move to the given region position and global rotation
GET STATUS
the vehicle will report its current status to the sending object
reply: GET STATUS;(integer)ParkingBrake;(integer)PumpMode;(integer)HoseLines
parameters:
reply: GET STATUS;(integer)ParkingBrake;(integer)PumpMode;(integer)HoseLines
parameters:
(integer)ParkingBrake : 0 for Parking Brake not applied, 1 for Parking Brake is applied
(integer)PumpMode : 0 for Pump Power Shift set to Road/Drive, 1 for Pump Power Shift set to Pump
(integer)HoseLines : 0 for no Hose Lines connected, 1 for one or more Hose Lines connecte
(integer)PumpMode : 0 for Pump Power Shift set to Road/Drive, 1 for Pump Power Shift set to Pump
(integer)HoseLines : 0 for no Hose Lines connected, 1 for one or more Hose Lines connecte
The truck will reply to each command by repeating it plus an integer for the execution status.
Possible reasons for movement not being successful:
- Hose Lines are connected
- Electric Cable Reel is deployed
- Exhaust Removal System is connected
- Electric Charging System is connected
- Target Position is more than 10 meters off region or above 4096m
- Target Position has parcel or region restrictions (object entry rule, prim limit, banned, etc.)
- Electric Cable Reel is deployed
- Exhaust Removal System is connected
- Electric Charging System is connected
- Target Position is more than 10 meters off region or above 4096m
- Target Position has parcel or region restrictions (object entry rule, prim limit, banned, etc.)
Example:
Object sends: SET POS ROT;<128.0, 128.0, 32.0>;<0.0, 0.0, 0.0, 1.0>
Truck will reply:
Object sends: GET STATUS
Vehicle will reply:
Truck will reply:
SET POS ROT;1 when the move and rotate was possible
SET POS ROT;0 when something hindered the movement
SET POS ROT;0 when something hindered the movement
Object sends: GET STATUS
Vehicle will reply:
GET STATUS;1;0;1
interpretation:
interpretation:
- Parking Brake is set (1)
- Pump Power Shift is set to Road/Drive (0)
- one or more Hose Lines are connected (1)
- Pump Power Shift is set to Road/Drive (0)
- one or more Hose Lines are connected (1)
10) Feedback
Please report all bugs, issues and feature suggestions via:
Instant Message or Notecard to Lares Carter.
Or the HD Website Forms for Suggestions and Bug Reports.
Thank you for your support.
Instant Message or Notecard to Lares Carter.
Or the HD Website Forms for Suggestions and Bug Reports.
Thank you for your support.